Fast Tracks • View topic - Second Handlaid Turnout

View unanswered posts | View active topics

Board index » Public Discussions » N Scale Discussions

All times are UTC - 5 hours [ DST ]

Second Handlaid Turnout

Moderators: Ron Warris, Tim Warris

Page 1 of 1

[ 2 posts ]

Print view

Previous topic | Next topic

Author

Message

jjbcnc

Post subject: Second Handlaid Turnout

Posted: Mon Mar 07, 2005 10:59 pm

Joined: Wed Mar 02, 2005 8:34 am
Posts: 4
Location: Horseheads, NY

This is my second attempt at a complete turnout using the Fast Track Jig. It is a number 8 n scale turnout. I have about 4 hours of my own labor tied up in building it. It does gauge to the NMRA standards. The only place I feel that there may be a problem is in the area just after the points. There does not seem to be much clearance between the stock rails and point rails.

John Butler

Attachments:

File comment: My Second Turnout

Turnout#2.JPG [ 44.89 KiB | Viewed 7454 times ]

Top

Rob de rebel

Post subject: spacing between stock and point rails.

Posted: Tue Mar 08, 2005 3:26 am

Hello John,

The turnout looks pretty good! On the point rail spacing with the stock rails if it passes the NMRA specs (check the gauge for the thick tabs that says points) then it should be good. Also hold the points to one side and run a set of trucks through the point area. If you have a problem, you'll find out right away.

Rob

Top

Page 1 of 1

[ 2 posts ]

Board index » Public Discussions » N Scale Discussions

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 1 guest

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum