Archived board. This is a read-only archive of the Fast Tracks forums, active 2004–2016. Posting closed in May 2016; the board was preserved as a static site in 2026. Some images were lost before archiving and are marked where they appeared.

Fast Tracks

Model Railroading Discussion Forums

Return To The Fast Tracks Website

The Fast Tracks discussion forums have been closed. Click Here for more information.
It is currently Thu Aug 06, 2026 12:00 am

View unanswered posts | View active topics


Board index » Public Discussions » Questions & Answers About Using Fast Tracks Tools

All times are UTC - 5 hours [ DST ]



Forum locked This topic is locked, you cannot edit posts or make further replies.  Page 1 of 1
  [ 3 posts ] 
  Print view Previous topic | Next topic 
Author Message
calgaryf
 Post subject: Pliobond Nozzle?
PostPosted: Tue Jul 11, 2006 7:58 pm 
Offline

Joined: Wed Mar 08, 2006 3:41 pm
Posts: 18
Hey all,

Finally starting to get the skeletons glued down to the quick sticks, and finding it quite frustrating to get the pliobond in the places I want it...Either it ends up between the stock rails and the points (not a good thing) or piling up on the ties which then leads to a lot of cleanup work.

In the videos, Tim is using a nozzle of sorts on the Pliobond tip...Certainly looks a lot easier when you're dealing with a smaller tip than what comes on the Pliobond tube...

Tim, could you share where you got the nozzle and how I could obtain one?

Thanks!
Jon
Top
 Profile  
 
Tim Warris
 Post subject:
PostPosted: Wed Jul 12, 2006 2:56 pm 
Offline
Site Admin

Joined: Fri May 07, 2004 11:22 pm
Posts: 311
Location: Port Dover, Ontario
(!empty($user->lang['QUOTE'])) ? $user->lang['QUOTE'] : ucwords(strtolower(str_replace('_', ' ', 'QUOTE'))):
Tim, could you share where you got the nozzle and how I could obtain one?


Hi,

The nozzle shown in the videos are from "CA" glue tips. I found these in a hobby shop that sold replacement nozzles for this type of glue. I cut the base of the nozzle off and pressed it onto the tube of Pliobond.

We will try and find a source for these and add them to the site.

_________________
Cheers!

Tim Warris
Fast Tracks
http://www.fast-tracks.net
service@fast-tracks.net
Top
 Profile  
 
calgaryf
 Post subject:
PostPosted: Wed Jul 12, 2006 3:07 pm 
Offline

Joined: Wed Mar 08, 2006 3:41 pm
Posts: 18
Tim Warris (!empty($user->lang['WROTE'])) ? $user->lang['WROTE'] : ucwords(strtolower(str_replace('_', ' ', 'WROTE'))):
(!empty($user->lang['QUOTE'])) ? $user->lang['QUOTE'] : ucwords(strtolower(str_replace('_', ' ', 'QUOTE'))):
Tim, could you share where you got the nozzle and how I could obtain one?


The nozzle shown in the videos are from "CA" glue tips. I found these in a hobby shop that sold replacement nozzles for this type of glue. I cut the base of the nozzle off and pressed it onto the tube of Pliobond.

We will try and find a source for these and add them to the site.


Good thought. I'll take a look at my LHS' and see what I can find in this respect. I thought you had something that actually screwed onto the threads on the Pliobond tip...But hey, one could use the contact cement or CA to glue the tip to the tube...

Thanks,
Jon
Top
 Profile  
 
Display posts from previous:  Sort by  
Forum locked This topic is locked, you cannot edit posts or make further replies.  Page 1 of 1
  [ 3 posts ] 

Board index » Public Discussions » Questions & Answers About Using Fast Tracks Tools

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 1 guest

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
cron
Powered by phpBB® Forum Software © phpBB Group